Autodesk Freewheel
Most recent forum messages
Click here to enter discussion group
Re: How to Print to Scale? Multiple Sheets?
Posted on 4 September 2008, 3:57 pm
by Scott Sheppard - Autodesk
|
No comments |
Permalink
Got it. Sorry I misinterpreted. At this time Autodesk Freewheel
(http://freewheel.autodesk.com) and Project Freewheel
(http://freewheel.labs.autdoesk.com) simply use the browser printing
capabilities. This typically means 8.5" by 11" without any ability to print
to scale. At Autodesk Labs,we may look into advanced printing capabilities
of Project
(http://freewheel.autodesk.com) and Project Freewheel
(http://freewheel.labs.autdoesk.com) simply use the browser printing
capabilities. This typically means 8.5" by 11" without any ability to print
to scale. At Autodesk Labs,we may look into advanced printing capabilities
of Project
Re: How to Print to Scale? Multiple Sheets?
Posted on 4 September 2008, 3:05 pm
by c_montelongo
|
1 comment |
Permalink
I think I did post the message in the correct spot. I am not having any problems with Design Review but with Freewheel. Our company often sends information to 3rd parties and they do not know what to do with DWFs. Therefore, I would like to use Freewheel to send those specific sheets to non-DWF users.
I have been trying to work out any kinks with FreeWheel before I propose that we start using it and so far I am just having a problem getting the print out (from FreeWheel) to print to
I have been trying to work out any kinks with FreeWheel before I propose that we start using it and so far I am just having a problem getting the print out (from FreeWheel) to print to
Re: How to Print to Scale? Multiple Sheets?
Posted on 4 September 2008, 1:43 am
by Scott Sheppard - Autodesk
|
2 comments. |
Permalink
I think you will want the Design Review forum.
wrote in message news:6022438@discussion.autodesk.com...
For some reason I can no longer print to scale. When I try to print, even
if I pick the paper size, the image comes out small on the correct paper
size. Is there a setting that I am not clicking? I have attached a pic
showing a sample what I'm getting and how it should look.
(Using: AutoCAD 2009, Design Review 2009, trying to make 11x17 PDF or print
with Xerox
wrote in message news:6022438@discussion.autodesk.com...
For some reason I can no longer print to scale. When I try to print, even
if I pick the paper size, the image comes out small on the correct paper
size. Is there a setting that I am not clicking? I have attached a pic
showing a sample what I'm getting and how it should look.
(Using: AutoCAD 2009, Design Review 2009, trying to make 11x17 PDF or print
with Xerox
How to Print to Scale? Multiple Sheets?
Posted on 3 September 2008, 7:56 pm
by c_montelongo
|
3 comments. |
Permalink
For some reason I can no longer print to scale. When I try to print, even if I pick the paper size, the image comes out small on the correct paper size. Is there a setting that I am not clicking? I have attached a pic showing a sample what I'm getting and how it should look.
(Using: AutoCAD 2009, Design Review 2009, trying to make 11x17 PDF or print with Xerox Printer)
Plus, is there a way to print multiple/all sheets instead of just one by one?
Thanks.
(Using: AutoCAD 2009, Design Review 2009, trying to make 11x17 PDF or print with Xerox Printer)
Plus, is there a way to print multiple/all sheets instead of just one by one?
Thanks.
Information on new Autodesk login system
Posted on 26 August 2008, 8:34 pm
by Scott Sheppard - Autodesk
|
No comments |
Permalink
Autodesk is working to consolidate multiple user accounts, simplify the sign
in process, and provide a single User ID and Password for accessing several
Autodesk web sites. To help ensure a smooth transition, we recommend that
you review your current account information for accuracy, especially first
name, last name, and e-mail address.
Please note: If you have multiple User IDs with the same email address and
want to keep those User IDs, you'll need to assign a
in process, and provide a single User ID and Password for accessing several
Autodesk web sites. To help ensure a smooth transition, we recommend that
you review your current account information for accuracy, especially first
name, last name, and e-mail address.
Please note: If you have multiple User IDs with the same email address and
want to keep those User IDs, you'll need to assign a
Re: image format
Posted on 26 August 2008, 7:57 pm
by Scott Sheppard - Autodesk
|
No comments |
Permalink
I did a right click browser SaveAs and I got a JPEG when viewing a 3D DWF.
I switch to a different 2D DWF file, did a right-click browser SaveAs
command and got a PNG.
wrote in message news:6015426@discussion.autodesk.com...
I did 'save as' to the image i got from freewheel and it was in .bmp format.
I thought that it comes back as .png
My conversion was to 3000X3000px image so the .bmp got to 26,000k while the
dwf was only 700k.
Can the return image format / size
I switch to a different 2D DWF file, did a right-click browser SaveAs
command and got a PNG.
wrote in message news:6015426@discussion.autodesk.com...
I did 'save as' to the image i got from freewheel and it was in .bmp format.
I thought that it comes back as .png
My conversion was to 3000X3000px image so the .bmp got to 26,000k while the
dwf was only 700k.
Can the return image format / size
Plexscape.com: Web application to overlay DWF on Google Maps using Freewheel
Posted on 26 August 2008, 6:39 pm
by lkaliakatsos
|
No comments |
Permalink
[nobr]Hi all!
I would like to inform you about an application (named MapWorks) I created which can be used to map overlay DWF drawings on Google Maps on their exact positions.
Some main features of the application:
- You can upload your DWF or use one which is publicly available in another server (this is preferred).
- You can overlay simultaneously multiple drawings on the map and create combined presentations.
- You have to know the DWF sheet corner coordinates in
I would like to inform you about an application (named MapWorks) I created which can be used to map overlay DWF drawings on Google Maps on their exact positions.
Some main features of the application:
- You can upload your DWF or use one which is publicly available in another server (this is preferred).
- You can overlay simultaneously multiple drawings on the map and create combined presentations.
- You have to know the DWF sheet corner coordinates in
image format
Posted on 25 August 2008, 11:53 pm
by yoavkali
|
1 comment |
Permalink
I did 'save as' to the image i got from freewheel and it was in .bmp format.
I thought that it comes back as .png
My conversion was to 3000X3000px image so the .bmp got to 26,000k while the dwf was only 700k.
Can the return image format / size can be controlled?
I thought that it comes back as .png
My conversion was to 3000X3000px image so the .bmp got to 26,000k while the dwf was only 700k.
Can the return image format / size can be controlled?
Re: zoom
Posted on 25 August 2008, 11:44 pm
by yoavkali
|
No comments |
Permalink
It was solved when the width and height where synced with the width and hight of the img tag
Re: DialogBox: Unreadable Text
Posted on 25 August 2008, 11:36 pm
by Scott Sheppard - Autodesk
|
No comments |
Permalink
Hello from the United States,
Thanks for reporting this defect. My guess is that the Project Freewheel
cascading style sheet is being ignored by Firefox 3.
wrote in message news:6015331@discussion.autodesk.com...
Hi from Germany,
please see the attached jpg first. Maybe you have any suggestions why
Firefox3.x does render the text incorrect? I've already try to change the
color or background style by an own css file. But the problem is
Thanks for reporting this defect. My guess is that the Project Freewheel
cascading style sheet is being ignored by Firefox 3.
wrote in message news:6015331@discussion.autodesk.com...
Hi from Germany,
please see the attached jpg first. Maybe you have any suggestions why
Firefox3.x does render the text incorrect? I've already try to change the
color or background style by an own css file. But the problem is